GymMaster Gym Software Manual

Doors and Readers

GymMaster software combined with door access hardware form an access control system which allows automated individualized entry

Sentinel Keypad

The Sentinel Keypad is a door reader with a keypad. Install it on the wall next to an access controlled door, and connect it to the Gatekeeper.

How it works

What it does

A member can open the door in two ways:

  • Enter their PIN on the keypad, then push #.
  • Hold their RFID fob near the reader.

The keypad reads RFID fobs at 125kHz and at 13.56MHz (MIFARE Classic and MIFARE Ultralight) and sends the PIN or the fob data to the Gatekeeper.

Parts and connections

Item Details
Communication RS485. Connect the reader to the Gatekeeper.
Power 9-24VDC.
Cable 4-core cable, 18-20 AWG (for longer runs), or a Cat5/6 cable, between the reader and the Gatekeeper. 100 m maximum. The reader comes with wires for tests.
Keys Capacitive touch keys.
Wires Four wires. See the wire table below.

Wires:

Wire colour Connection
Black Ground
Red 12V
Blue A
Green B

The communication wires of this reader are blue (A) and green (B). On the Sentinel Wall Reader, they are white and green.

Lights and sounds

Indicator Meaning
LED flashes green from time to time The reader is idle.
LED flashes green, one beep Access is given.
LED flashes red, deny sound Access is not given.

Specifications

Item Value
Input voltage 9-24VDC
Communication interface RS485
Communication standards 125kHz, 13.56MHz (MIFARE Classic/Ultralight)
Button Push button capacitive touch
Indicators Red/Green LED, buzzer
Operating temperature -20 °C - 70 °C
Configuration methods Factory configured
Housing Metal, plastic
Colour Silver
Dimensions 158 mm (H) x 55 mm (W) x 30 mm (D)

Next - Cidron