GymMaster Gym Software Manual
Doors and Readers
GymMaster software combined with door access hardware form an access control system which allows automated individualized entry
- Hardware
- Gatekeepers: Gatekeeper H6 · Gatekeeper H5 · Gatekeeper H4 · Gatekeeper Mini 4 · Gatekeeper Mini 3
- Door readers: Sentinel Wall Reader · Sentinel Keypad · Cidron · CN485 · CV485
- Desktop readers: Desktop Reader · Sentinel Desktop
- Other: Tailgating cameras · Key Fobs
- Installation and Documents
- Integrate Hardware with GymMaster
- Manage Doors
- Door Access
- Troubleshooting
- Frequently Asked Questions
CN485
How it works
What it does
The CN485 reader is dark grey, with an LED in the center. There are two sizes: wide and narrow. Some of these readers have a hexagonal G logo in the bottom right corner.
A member holds an RFID fob near the reader. The reader sends the fob data to the Gatekeeper.
Parts and connections
| Item | Details |
|---|---|
| Communication | RS485. The reader connects to the Reader 1 or Reader 2 socket on the Gatekeeper. |
| Power | The reader gets 12V DC from the same Gatekeeper socket. |
| Cable | 4-core cable, 18-20 AWG (for longer runs), or a Cat5/6 cable, between the reader and the Gatekeeper. 100 m (110 yds) maximum. The reader comes with short wires for tests. |
| Wires | Four wires. See the wire table below. |
Wires:
| Wire colour | Connection |
|---|---|
| Black | Ground |
| Red | 12V |
| White | A |
| Green | B |
Caution: Do not install the reader on metal that conducts electricity and has no earth. Keep the reader away from electrical noise, for example motors and fluorescent lights. If there are two door readers, keep a minimum of 5 cm (2 in) between them.
Lights and sounds
| Indicator | Meaning |
|---|---|
| LED is red for a short time when you connect it | The reader gets power from the Gatekeeper. |
| LED is green | Normal state. The card reading software is active. |
| LED changes from green to red | The reader read a valid RFID fob. |
| LED is off | The reader possibly has no power. Examine the wires and the Gatekeeper power. |
| LED is pulsating red or green | The reader has voltage issues and is most likely at the end of its lifetime. |
| Reader beeps once | A fob is being read. |
| Reader beeps twice | Access is denied. |
Related Documents
- Troubleshooting guidelines (PDF)
- Gatekeeper h4.1 instructions (PDF)
- Gatekeeper h5 instructions (PDF)
- Gatekeeper H technical instructions (PDF)
- Gatekeeper H5 v3 installation guide (PDF)
Next - CV485